DELL D6000S USER MANUAL Pdf Download (2024)

FAQs

How to setup Dell Docking Station D6000s? ›

How many external monitors does the Dell Universal Dock D6000 support? Up to 3 displays via USB Type-C connection: 1 x 5K; 2 x 4K; 3 x 4K. Up to 2 displays via USB Type-A connection.

Orange light means power, white light means connected. There are two micro usb slots on that docking station, one on the front, one on the back.

Installing or updating the drivers to the latest version ensures optimal performance of the docking station. Dell Performance Docking Station WD19DC/WD19DCS is a device that links all your electronic devices to your PC using a dual USB Type-C cable interface.

Ensure that the latest BIOS and drivers for your laptop and the docking station are installed on your laptop. Ensure that your laptop is connected to the docking station securely. Try to disconnect and reconnect the docking station to the laptop.

The Dell D6000 dock manual makes reference to installing drivers, and to DisplayLink. It appears that if you run a USB-C connection to the D6000 without installing DisplayLink drivers, only one of the video ports on the D6000 will be active: the HDMI port.

Dell Universal Dock D6000 works with any PC equipped with USB 3.0 Type-A, USB Type-C, or Thunderbolt 3. However, bandwidth is capped at USB 3.1 Gen1 (5Gbps).

Equipped with dual DisplayPort and one HDMI ports for easy connection to triple 4K monitors, each supporting resolutions up to 4K@60Hz, 4K@60Hz and 4K@30Hz. Single video output up to 5K@60Hz. Lower resolutions such 1920x1080 (1080p) are also supported.

This light is on the USB Type-C connector that plugs into the computer from the docking station. It is the best indicator that the docking station has power and connectivity to the computer. It should be lit whenever the computer is connected.

How to tell if a Dell docking station is working? ›

Check Dock Name, Service Tag, and Package Version. When the Service Tag and Dock Name are displayed, this indicates that the dock is working and detected by the computer. If it is not detected, then there may be either a connectivity or power issue. For assistance, contact Technical Support.

If you use 2 USB C ports then one port could be used for data while the other is used for DP Alt mode video. Two ports would allow an effectively "full speed" USB 3 connection at the same time as a dedicated display from the GPU.

For optimal performance, Dell recommends updating the BIOS and Chipset driver on your PC before installing the DisplayLink driver for the docking station. Download and install the latest DisplayLink driver from Dell Drivers & Downloads page for your D6000 Docking Station.

Go to Dell.com/support/drivers and identify the docking station using the Service Tag or the model number. Download the stand-alone dock firmware update utility. Connect the docking station to the laptop. Open the downloaded dock firmware update utility in administrative mode (run as administrator).

Try to disconnect and reconnect the docking station to the laptop. Disconnect both ends of the video cable and check for damaged or bent pins. Securely reconnect the cable to the monitor and docking station. Ensure the video cable (HDMI, or DisplayPort) is connected properly to the monitor and the docking station.

Setting up a docking station is usually straightforward. Start by connecting the docking station to a power source and then connect your laptop or device to the docking station using the appropriate cable. Ensure that any necessary drivers or software are installed for optimal compatibility.